Cisco Systems 7401 quick start Observe System Startup and Performing a Basic Configuration

Page 24

Step 2 Ensure that no current is flowing through the DC power supply leads. To ensure that all power is OFF, locate the circuit breaker on the panel board that services the DC circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit breaker in the OFF position.

Step 3 Using a wire stripper, strip approximately 0.55 inch (14 mm) from the –V and +V leads.

Figure 21 Attaching the Wires to the DC Plug and the DC Plug to the DC Connector

 

 

B

B

 

 

A

A 50538

 

4

3

5

 

 

1

 

 

 

 

2

 

 

 

1

DC plug

 

4

Single DC power supply connector

2

Lead

 

5

Dual DC power supply connectors

3

+ and – embossed on connector

 

 

Step 4 To determine which lead to connect to which screw in the DC plug, align the DC plug (1) with the DC connector (4, 5) in the chassis as shown in the illustration above. Do not insert the plug in the connector. Notice the symbols, + A – , embossed on the connector (3). Use the symbols and the orientation of the plug to guide you when inserting the leads into the plug.

Step 5 Loosen the screws in the DC plug (1), insert the +V and –V leads, and tighten the screws. Step 6 Insert the DC plug (1) into the DC connector (4) in the chassis.

Step 7 Repeat Step 5 and Step 6 if you have a dual DC power supply (5).

Step 8 Switch the circuit breaker to the ON position

Observe System Startup and Performing a Basic Configuration

Check conditions prior to system startup:

Step 1 Check that all hardware parts and cables are securely attached to the chassis.

Step 2 Check that port adapter configuration information is available, if needed.

Step 3 Check that a CompactFlash Disk is installed.

Step 4 Check that the console terminal is turned on.

24

Image 24
Contents Cisco 7401ASR Router Documentation and Resources Documentation Survey Related DocumentationOther Useful Links Obtain Documentation Cisco.comObtain Additional Publications and Information Ordering DocumentationDocumentation Feedback Prepare for Installation Site Preparation and UnpackingTools and Parts Prepare for Workbench or Tabletop Installation Prepare for Rack-Mount InstallationIdentify I/O Panel Ports Install the Parts Install the CompactFlash DiskAbout the CompactFlash Disk Install the Gigabit Interface Converter Class 1 LED productReplace the Sdram Dimm Removing the CoverRemove and Install the Dimm DimmReplace the Port Adapter or Service Adapter Inserting the Port AdapterPage Enabled Attach the Rack-Mount Brackets-Chassis Rear-Mounted Attaching the Rack-Mount Brackets to the Rear of the ChassisAttach the Cable-Management Bracket Attaching the Cable-Management BracketFour-Post Rack Installation Installing the Cisco 7401ASR Router in a Four-Post RackTwo-Post Rack Installation Chassis Ground Connection Installation Attaching the Grounding Lug and Wire to the ChassisConnect the Router to the Network Console and Auxiliary Port Cable ConnectionsGigabit Ethernet and Fast Ethernet Port Connections Fast Ethernet RJ-45 Connections Intra-Building Lightning ProtectionGbic Cabling and Connection Equipment Attach a Mode-Conditioning Patch Cord Attaching the Mode-Conditioning Patch CordPort Adapter Cable Connections Alarm Port Connection Cable ManagementConnect Power to the Router Connect AC-Input PowerConnect DC-Input Power Observe System Startup and Performing a Basic Configuration Start the Router LEDConfigure the Router Perform a Basic Configuration Using the Setup FacilityConfigure Global Parameters Enter enable secret, enable, and virtual terminal passwords Changing the Media Type Debug Configure Port Adapter Interfaces Reset the InterfaceConfigure Fast Ethernet Interfaces Page Save the Running Configuration to Nvram Snmp-server community public Ip routingCheck the Running Configuration Settings View Your System ConfigurationPerform Complex Configurations Replace or Recover a Lost PasswordObtain Technical Assistance Cisco TAC WebsiteCisco TAC Escalation Center Page Page Page USA

7401 specifications

Cisco Systems 7401 is a robust router designed for numerous applications, particularly in service provider and enterprise environments. It stands out in the market due to its high capacity, innovative technology, and versatile features, making it an ideal choice for organizations looking for scalable and reliable network solutions.

At the core of the Cisco 7401 is its ability to handle high levels of data traffic efficiently. It supports advanced IP routing protocols, ensuring optimal routing decisions and improved network efficiency. The router is equipped with multi-service support, which allows it to simultaneously manage data, voice, and video traffic. This feature is essential for organizations aiming to unify their communications and enhance collaboration.

One of its notable technologies is the Cisco IOS (Internetwork Operating System), which powers the router with a comprehensive suite of network services. The IOS provides advanced security features, including firewalls and VPN support, protecting data integrity and ensuring secure connections across the network.

The 7401 also supports advanced Quality of Service (QoS) capabilities, enabling organizations to prioritize their network traffic effectively. This is particularly crucial for applications that require real-time data transmission, such as VoIP and video conferencing. By managing bandwidth allocation intelligently, the router ensures that critical applications receive the necessary resources to perform optimally while minimizing latency and disruptions.

In terms of performance, the Cisco 7401 is designed to support advanced network architectures, such as Software-Defined Networking (SDN) and Network Functions Virtualization (NFV). This adaptability allows organizations to implement flexible and dynamic networking models, facilitating rapid deployment of services and scalability as business needs evolve.

Moreover, the router boasts a modular design, allowing businesses to customize their configurations to fit specific needs. It supports various interface modules, providing a range of connectivity options, including Ethernet, Fiber, and MPLS. This flexibility ensures that organizations can expand their network capabilities without a complete hardware overhaul.

In summary, the Cisco Systems 7401 is a powerful, feature-rich router suitable for diverse applications within complex network environments. With its high capacity, support for advanced technologies, and security features, it remains a formidable option for organizations looking to enhance their network infrastructure and streamline their communications.