Setting the clock
Usethese instructions to set the clock.
1 TouchClock Adjustment on the system
menu.
2 TouchOn/Off to turn the clock display
on.
#Toturn the clock display off, touch On/Off
again.
3 Touchcor dto select the segment of
theclock display you wish to set.
Eachtime you touch cor dit will select one
segmentof the clock display:
Hour—Minute
Asyou select segments of the clock display
thesegment selected will be highlighted.
4 Touchaor bto put a clock right.
Notes
!Youcan match the clock to a time signal by
touchingJust.
—If00 to 29, the minutes are rounded down.
(e.g.,10:18 becomes 10:00.)
—If30 to 59, the minutes are rounded up.
(e.g.,10:36 becomes 11:00.)
!Evenwhen the sources are off, the clock dis-
playappears on the display.
Setting for rear viewcamera (back up camera)
CAUTION
Pioneerrecommends the use of a camera
whichoutputs mirror reversed images, other-
wisescreen image may appear reversed.
Thisunit features a function that automatically
switchesto the rear view camera video (VIN
jack)when a rear view camera is installed on
yourvehicle. When thegear shift is in RE-
VERSE(R) position, the video automatically
switchesto a rear view camera video. (For
moredetails, consult your dealer.)
!Afteryou set upthe rear view camera set-
ting,move the gear shift in REVERSE (R)
andconfirm if a rear view camera video
canbe shown on the display.
!Ifthe display should be switched to a rear
viewcamera video by error while you are
drivingforward, change the rear viewcam-
erasetting.
!Toend watching a rear view camera video
andreturn to the source display, press and
holdMUTE.
!Evenwhile driving, rear view camera image
canbe displayed. To do this, touch
RearViewsource icon. In this case, touch
RearViewagain to turn off the rear view
camera.For details, refer to Selecting a
sourceon page 13.
%TouchCamera Polarity on the system
menuto select an appropriate setting.
!Battery–When the polarity of the con-
nectedlead is positive while the gear shift
isin REVERSE (R) position
!Ground–When the polarity of the con-
nectedlead is negative while the gear shift
isin REVERSE (R) position
!Off–When a rear view camera is not con-
nectedto this unit
System settings
En
56
Section
16