#Whenno subwoofer is connected to the rear
output,select Full (full-range speaker).
#Whena subwoofer is connected to the rear
output,select Subwoofer (subwoofer).
#Whenthe rear output setting is Subwoofer,
youcannot operate the following procedure.
3 Touchcor dnext to Preout to switch
thesubwoofer output or rear output.
Touchingcor dwill switch between
Subwooferand Rear and that status will be
displayed.
Notes
!Evenif you change this setting, there is no
outputunless you turn the subwoofer output
on(refer to Using subwoofer output on page
45).
!Ifyou change this setting, subwoofer output
inthe audio menu will return to the factory
settings.
!Bothrear speaker lead outputs and RCA rear
outputare switched simultaneously in this
setting.
Changing languages forCAUTION
Someoperations on this unit are prohibited
whiledriving or needs to be paid a careful at-
tentionwhen operating. In such case, a cau-
tionappears on the display. You can change
thelanguage of the cautions at this setting.
%TouchCaution Language on the initial
menuto select your desired language.
Eachtime you touch Caution Language it se-
lectslanguages for CAUTION in the following
order:
English(English)Español (Spanish)
Français(French)
Switching the soundmuting/attenuation
Soundfrom this system is muted or attenu-
atedautomatically when the signal from the
equipmentwith mute function is received.
!Soundfrom this system returns to normal
whenthe muting or attenuation is can-
celed.
%TouchTEL on the initial menu to select
thesetting.
TouchTEL until the desired setting appears in
thedisplay.
!MuteMuting
!ATT-20dBAttenuation (ATT -20dB hasa
strongereffect than ATT-10dB)
!ATT-10dBAttenuation
!OffTurn the sound muting/attenuation
off
Notes
!Thesound is turned off, Mute is displayed
andno audio adjustments are possible.
!Thesound is attenuated, AT T isdisplayed and
noaudio adjustments, except volume control,
arepossible.
!Operationreturns to normal when the phone
connectionis ended.
Entering PIN code forBluetooth wireless connection
Toconnect your cellular phone to this unit via
Bluetoothwireless technology, you need to
enterPIN code on your phone to verify the
connection.The default code is 0000, but you
canchange this in this function.
!Withsome Bluetooth audio players, you
maybe required to enter the Bluetooth
audioplayer PIN code in advance to set
thisunit for a connection.
!Youcan only operate this function when
Bluetoothadapter (e.g. CD-BTB200) is con-
nectedto this unit.
Initial Settings
En
52
Section
15