Pioneer AVH-P3100DVD Initial Settings Adjusting initial settings, Switching the auxiliary setting

	Section
Initial Settings	15

Adjusting initial settings

1

1Function display

Shows the function names.

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Touch the source icon and then touch Off to turn this unit off.

Switching the auxiliary 1 setting

%Touch AUX1 on the initial menu to se- lect desired setting.

!Video – auxiliary video device connected with 4-pole mini plug cable (e.g., CD- V150M)

!Audio – auxiliary device connected with stereo mini plug cable

!iPod – an iPod with video capabilities con- nected with CD-IU50V

!Off – No auxiliary device is connected

Switching the auxiliary 2 setting

%Touch AUX2 on the initial menu to turn

auxiliary 2 setting on.

# To turn auxiliary 2 setting off, touch AUX2 again.

Initial Settings

2Touch the screen to display the touch panel keys.

3Touch AV Menu and then touch

Initial Menu to display the function names. The function names are displayed and oper- able ones are highlighted.

4Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch Back.

Switching the auxiliary setting

Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 59.

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a sub- woofer without using an auxiliary amp. Initially, the unit is set for rear full-range speak- er connection (Full). When rear output is con- nected to full range speakers (when Full is selected), you can connect other full range speakers (Rear) or a subwoofer (Subwoofer) to the RCA rear output.

!When the multi-channel processor (DEQ- P8000) is connected to this unit, you can- not operate this function.

1Touch Rear Speaker on the initial menu.

2Touch c or d next to Rear Speaker to switch the rear output setting.

Touch c to select full-range speaker and Full appears in the display. Touch d to select sub- woofer and Subwoofer appears in the dis- play.

En 51