Ricoh AP3800C Adjustment A: -7.0+7.0 +0, Color Regist Manual Adjust, Test Sheet Print

Adjusting the Color Registration

Manual Adjust

Important

❒Normally, do not perform manual color adjustment.

A Press {Menu}.

ZDJS001J

"Menu" appears on the panel dis- play.

B Press {U} or {T} to display "Maintenance", and then press {Enter}.

E Confirm that "Print" is displayed in the menu for printing the Test Sheet, and then press {Enter}.

Test Sheet:

Print

The Test Sheet is printed. See p.41	2
“Test Sheet Samples”.

F Enter the corrective values for A through L on the Test Sheet in or- der.

Adjustment A: (-7.0 +7.0) +0

Note

❒Confirm the printed Test Sheet to enter the correction values.

AUse {U} or {T} to enter the val- ue (-7.0 to +7.0) shown next to the whitest square, into box A of the Test Sheet.

Menu:

Maintenance

The maintenance menu is dis- played.

C Press {U} or {T} to display "Color Regist.", and then press {Enter}.

Maintenance:

Color Regist.

D Press {U} or {T} to display "Man- ual Adjust", and then press {En-

ter}.

Color Regist.:

Manual Adjust

Adjustment A: (-7.0 +7.0) +2

Note

❒Pressing {U} or {T} increas- es or decreases the value in 0.5 units.

❒Sometimes, there are two of the whitest squares next to each other. For example, if the two squares of "+1" and "+2" are the whitest, enter "+1.5".

❒You can adjust the color alignment for each color in the range of "-7.0 to +7.0".

❒There is an area on the Test Sheet for you to put down the values of "A" through "L".

39