Ricoh AP3800C Status, Possible Causes, Descriptions, and Solutions, It takes too much time to com

		Other Printing Problems
Status		Possible Causes, Descriptions, and Solutions
It takes too much time to com-	Photographs and other data intensive pages take a long time
plete the print job.	for the printer to process, so simply wait when printing such
	data.
	Changing the following settings may help to speed up print-
	ing.
	•	PCL 5c
		Select "600⋅600 dpi" for Resolution under the [Print Quali-
		ty] tab in the printer driver's dialog box.
	•	PostScript
		Select "1200⋅600 dpi" or "600⋅600 dpi" for Resolution un-
		der the [Print Quality] tab in the printer driver's dialog box.
		Select "Post Script(optimize for speed)" for PostScript
		output format under the [PostScript] tab in the printer
		driver's dialog box.
	•	RPCS
		Select "1200⋅600 dpi" or "600⋅600 dpi" for Resolution un-
		der the [Image Adjustments] tab in the Change Use Settings
		dialog box in the printer dialog box.
		Select "Speed" for Print priority under [Print Quality] tab in
		the printer driver's dialog box.
	For more information, see the printer driver's Help file.
	The data is so large or complex that it takes time to process
	it. If the Data In indicator is blinking, the data processing is
	being done. Just wait until it resumes.
	If "Warming Up... " appears on the panel display, the printer
	is now warming up. Wait for a while.
		Note
	❒ To maintain the best quality, color adjustment is executed
		regularly during printing or after printing. Even if print-
		ing is not specified, color adjustment is sometimes exe-
		cuted regularly when the power is on.
It takes too much time to resume	The data is so large or complex that it takes time to process
printing.	it. If the Data In indicator is blinking, the data processing is
	being done. Just wait until it resumes.
	The printer might be set to the Energy Saver mode. In the En-
	ergy Saver mode, the printer has to warm up, and this takes
	time until printing starts. To cancel the Energy Saver mode,
	select "Off" for "Energy Saver 1" in the System Settings menu.
Multiple pages are fed through	Paper misfeeds easily when the Paper Feed Roller is dirty.
the printer at once.	Contact your sales or service representative to replace the Pa-
	per Feed Roller.

4

85