Ricoh AP3800C operating instructions Replacing the Fuser Oil Unit, Replace Fuser Oil Unit TypeG

Replacing Consumables and Maintenance Kit

Replacing the Fuser Oil Unit

1

RCAUTION:

•The Fusing Unit becomes very hot. When installing the new Fuser Oil Unit, turn off the printer and wait about an hour. After that, install the new Fusing Unit. Not waiting for the unit to cool down can result in a burn.

If "Replace Fuser Oil Unit (TypeG)" appears on the panel display, replace the Fuser Oil Unit.

Replace Fuser

Oil Unit (TypeG)

A Turn off the power switch and unplug the power cable.

Important

❒Be sure to wait about an hour to prevent a burn.

B If 2 Tray Finisher is installed, de- tach it from the printer.

Reference

See p.1 “Detaching the SR770 (2 Tray Finisher)”

C If the Duplex Unit is installed, open the Duplex Reversal Unit.

Reference

See p.2 “Opening and Closing the Duplex Reversal Unit”

D If the External Tray is attached to the printer, raise it in the direc- tion of the arrow (A), and remove

it (B).

ZDJP038J

E Pull out the left cover of the print- er slowly.

ZDJH047J

F Open the upper left cover.

ZDJH048J

6