Ricoh AP3800C operating instructions Removing Misfed Paper in the Duplex Feed Unit

Removing Misfed Paper

Opening and Closing the Duplex Reversal Unit

There are times when you might have to detach the Duplex Reversal Unit to remove misfed paper. This section describes how to detach the Duplex Reversal Unit.

A Push up the lock release button and keep it in place.

ZDJP203J

C Raise the Duplex Reversal Unit slowly with both hands, and push it in until it clicks into place.

ZDJP205J

The Duplex Reversal Unit is	4
closed.

Important

❒Attach the Duplex Reversal Unit after closing the upper left cover for the printer.

B Lower the Duplex Reversal Unit slowly until it stops.

ZDJP204J

Important

❒Open the Duplex Reversal Unit after detaching the 2 Tray Fin- isher from the printer.

Note

❒You do not have to remove the output tray even if the 2 Tray Finisher is attached.

The Duplex Reversal Unit is opened.

Removing Misfed Paper in the Duplex Feed Unit

You can remove misfed paper from the Duplex Feed Unit following the procedure below.

Note

❒When a paper misfeed occurs in the Duplex Feed Unit, the printer usually sends the misfed paper to the right cover and there is no need to execute following procedure. See p.92 “When "Remove Misfeed A:Internal Path" Appears”.

Important

❒Be sure to remove a misfed paper following the procedure below, only when "Remove Misfeed: Dup. Feed Unit" appears on the panel display.

89