Ricoh AP3800C operating instructions Load Paper in the Bypass Tray, A Open the bypass tray

Paper and Other Media

Load Paper in the Bypass Tray

Besides regular paper, you can load thick paper, envelopes, OHP trans- parencies, and paper that is longer than A3L onto the Bypass Tray, which cannot be loaded in the Paper Trays or Paper Feed Unit.

Note

	❒ Paper sizes supported by the By-
3
	pass Tray are 90 - 305 mm in width,
	and 148 - 458 mm in length.

❒If you load custom size paper or special paper, select the paper size with the control panel. The RPCS printer driver can select the paper size with the printer driver proper- ties. The paper size selected with the printer driver overrides the one selected with the control pan- el. See p.66 “Specifying a custom paper size for the Bypass Tray”.

❒If you load thick paper, OHP trans- parencies, or envelopes, make the settings for thick paper or OHP transparencies with the control panel or printer driver. See p.67 “Specifying a paper type for the Bypass Tray”.

❒The number of pages that can be loaded in the Bypass Tray differs depending on the paper type. Con- firm that the top of the stack is not higher than the limit mark inside the tray.

Limitation

❒You cannot use the following func- tions when printing on paper that is loaded in the Bypass Tray.

•Duplex Print

•Collate, Job Separation

•Staple/Punch

•Auto Tray Select

A Open the bypass tray.

ZDJH202J

Note

❒If you load A4 or larger size pa- per, pull out the bypass tray ex- tension, and then flip it open.

ZDJH203J

64