Ricoh AP3800C Menu Maintenance Fuser Adjust Custom Adjust, When color shifting occurs

Adjusting the Color Registration

When color shifting occurs

Perform this procedure when color shifting occurs even after performing "Auto Adjust".

A Load A4L or larger paper in the Bypass Tray.

Note

❒Be sure to select paper size in the "Paper Input" menu.

Reference

For details about paper size and the procedure for loading paper in the Bypass Tray, see p.64

“Load Paper in the Bypass Tray”.

B Press {Menu}.

ZDJS001J

"Menu" appears on the panel dis- play.

C Press {U} or {T} to display "Maintenance", and then press {Enter}.

D Press {U} or {T} to display "Color Regist.", and then press {Enter}.

Maintenance:

Color Regist.

E Press {U} or {T} to display "Fuser	2
Adjust", and then press {Enter}.

Color Regist.:

Fuser Adjust

Important

❒When the toner cartridge is al- most empty, or Auto Adjust is not finished, the following mes- sage appears on the panel dis- play and "Fuser Adjust" is not available.

Cannot Adjust

See User’s Guide

Confirm that the toner cartridge is installed. The toner cartridge must be installed. See p.3 “Replacing the Toner Cartridge”.

If the toner cartridge is installed, perform "Auto Adjust".

F Press {U} or {T} to display "Cus- tom Adjust", and then press {En- ter}.

The following message appears on the panel display.

Menu: Maintenance

Fuser Adjust: Custom Adjust

The maintenance menu is dis- played.

37