Ricoh AP3800C operating instructions Replacing the Fusing Unit, Replace Fusing Unit Type C

Replacing the Fusing Unit

Replacing the Fusing Unit

RCAUTION:

•The Fusing Unit becomes very hot. When installing the new Fusing Unit, turn off the printer and wait about an hour. After that, install the new Fusing Unit. Not waiting for the unit to cool down can result in a burn.

If "Replace Fusing Unit (Type C)" ap- pears on the panel display, replace the Fusing Unit.

Replace Fusing

Unit (Type C)

A Turn off the power switch and unplug the power cable.

Important

❒Be sure to wait about an hour to prevent a burn.

B If the 2 Tray Finisher is installed, detach it from the printer.

Reference

See p.1 “Detaching the SR770 (2 Tray Finisher)”

C If the Duplex Unit is installed, open the Duplex Reversal Unit.

Reference

See p.2 “Opening and Closing the Duplex Reversal Unit”

D If the External Tray is attached to

the printer, raise it in the direc- 1 tion of the arrow (A), and remove

it (B).

ZDJP038J

E Pull out the left cover of the print- er.

ZDJH047J

F Open the upper left cover.

ZDJH048J

Important

❒Do not touch any areas other than the handle.

19