Ricoh AP3800C operating instructions Envelopes

Paper Recommendations

❖Envelopes

Important

❒ Only envelopes A and B as shown below are supported.

Supported *1

Supported *1

Not supported

*1 Misfeeds also might occur when using envelopes A and B depending on the length and shape of the flaps.

3

• When printing on envelopes, use the bypass tray, and select "Thick Paper" as a paper type in the "Paper Input" menu on the control panel.

⇒ p.67 “Specifying a paper type for the Bypass Tray”

• Specifications of envelopes are as follows:

	Metric version	Inch version
Weight	72 - 90 g/m2	19 - 24 lb
Recommendedweight	72 g/m 2, 114 ⋅ 162 mm	24 lb, 37/8" ⋅ 71/2"
and size	(C6 Env)	(Monarch)

• You can load up to 10 envelopes (72 - 92 g/m2, 19 - 24 lb) in the Bypass Tray at the same time, without forcibly pressing them. Confirm that the enve- lopes are not damp, and that the top of the stack is not higher than the limit mark on the side guide.

• Confirm that the print side is facing up when loading onto the Bypass Tray.

• When loading envelopes, be sure to unfold the flaps and position them op- posite to the paper feed direction.

55