Paper and Other Media

E Press {On Line}.

"Ready " appears on the panel display.

Ready

Specifying a custom paper size for the Bypass Tray

3Important

The paper size selected with the printer driver overrides the one se- lected with the control panel. You do not have to make settings with the control panel if you already made them with the printer driver. However, when printing with a printer driver other than the RPCS printer driver, you must make the settings using the control panel. For more information about the printer driver, see the Help Files.

The printer cannot print from ap- plications that do not supports custom paper size.

A Press {Menu}.

ZDJS001J

"Menu" appears on the panel dis- play.

B Press {U} or {T} to display "Paper Input", and then press {Enter}.

The following message appears on the panel display.

Menu:

Paper Input

C Confirm that "Bypass Size" is dis- played, and then press {Enter}.

The following message appears on the panel display.

Paper Input:

Bypass Size

D Press {U} or {T} to display "Cus- tom Size", and then press {Enter}.

The following message appears on the panel display.

Bypass Size:

Custom Size

E Press {U} or {T} to set the hori- zontal value, and then press {En- ter}.

The following message appears on the panel display.

Custom Size:

Vert. 297mm

F Press {U} or {T} to set the vertical value, and then press {Enter}.

Custom Size:

Horiz. 210mm

After about two seconds, the dis- play is returned to the menu.

66

Page 76
Image 76
Ricoh AP3800C operating instructions Bypass Size Custom Size, Custom Size Vert mm, Custom Size Horiz mm