Ricoh AP3800C Custom Adjust Plain 600dpi, Select Action, Set Sheet, then# A3 297 X

Cleaning and Adjusting the Printer

G Press {U} or {T} to display the paper types and resolution in which color shifting occurs, and then press {Enter}.

J Press {U} or {T} to make the off- set settings, and then press {En- ter}.

When such a clear (not smeared in red) square as the sample is:

2

Custom Adjust:

Plain: 600dpi

Select a value from "Plain: 600dpi",

"Plain: 1200dpi" and "Thick: 600dpi".

•at its center position, select "0".

•shifted to the left, select "-1".

•shifted to the right, select "+1".

Select Action:

Note

❒The current resolution is dis- played on the printer driver properties.

❒To adjust the color registration on thick paper, select "Thick: 600dpi" regardless of the cur- rent resolution.

H Confirm that the following mes- sage is displayed, and then press {Enter}.

Press # for Test

Print (Bypass)

0: Exit

Select Action:

-1: Re-adjust

Select Action:

+1: Re-adjust

If you select "0: Exit", the printer re- turns to the previous menu.

If you select "-1" or "+1", the printer returns to step H. Keep adjusting until "0" is available.

K Press {On Line}.

The following message appears on the panel display. The size of the paper loaded in step A is shown.

Set Sheet, then# A3 (297 X 420)

"Ready " appears on the panel dis- play.

Ready

I Confirm that A4Lor larger paper is in the Bypass Tray, and then press {Enter}.

The Test Sheet is printed. See p.41 “Test Sheet Samples”

38