Ricoh AP3800C UTILITY\1394, Troubleshooting, Messages/Second messages, Description, Solution

Troubleshooting

	Messages/Second messages	Description	Solution
	Hardware Problem Finisher	There is a problem with the	Turn the power switch off and
		finisher.	then on. If the message ap-
			pears again, contact your sales
			or service representative.
	Hardware Problem HDD	The printer identified a HDD	Remove and re-install the
		Board error.	HDD Board correctly.
			If the message appears again,
			contact your sales or service
			representative.
			See "Setting Up" in the Setup
			Guide.
	Hardware Problem IEEE1394	The printer identified an	Remove and re-install the
		IEEE1394 Board error.	IEEE1394 Board correctly.
4
			A Confirm that the 1394 In-
			terface Unit Type1045 is
			attached to the computer
			correctly.
			B Confirm that the IEEE1394
			interface cable is connect-
			ed securely.
			C Unplug the IEEE1394 in-
			terface cable which is con-
			nected to the printer.
			D Restart the computer.
			If the message appears
			again even after executing
			above operation, proceed
			to the following steps.
			E Execute the utility tool for
			1394 Interface Unit
			Type1045 which is stored
			in the following path in the
			CD-ROM labeled "Printer
			Drivers and Utilities".
			UTILITY\1394
			Important
			❒ For details about using
			the utility tool for
			IEEE1394, see the RE-
			ADME file in the same
			directory in the CD-
			ROM.
			If the message appears again,
			contact your sales or service
			representative.
			See "Setting Up" in the Setup
			Guide.

72