Ricoh AP3800C Adjusting the Image Density, Maintenance Image Density, Image Density Black, Menu

Adjusting the Image Density

Adjusting the Image Density

Adjust the image density when the print side of the page is a hazy gray or the print image looks patchy.

Important

❒Extreme settings may create out- put that appears dirty.

❒Image density settings should be made from the application or the printer driver whenever possible.

Note

❒Changing the image density set- ting might cause a deterioration of color balance. We recommend that you leave the image density at its factory default setting.

A Press {Menu}.

ZDJS001J

"Menu" appears on the panel dis- play.

B Press {U} or {T} to display "Maintenance", and then press {Enter}.

C Press {U} or {T} to display "Im- age Density", and then press {En-

ter}.

Maintenance:

Image Density

D Press {U} or {T} to select the color you want to adjust, and then press {Enter}.

Image Density:

Black

E Press {U} or {T} to set the image density value, and then press {En- ter}.

Black:
(-3 +3)	0

Note

❒You can adjust the image densi- ty in seven steps from -3 to +3. Increasing the value makes the printouts darker and decreasing the value makes the printouts lighter.

To adjust another color, repeat step

Dand E.

F Press {On Line}.

"Ready " appears on the panel dis- play.

2

Menu:
Maintenance	Ready

43