Ricoh AP3800C operating instructions Please Wait, O If you removed the External Tray

Replacing the Fusing Unit

M Holding the green handle of the new Fusing Unit, use your other hand to push the area right in front of the handle to create a slight slant, and then push the Fusing Unit slowly to the back.

ZDJH050E

Important

❒Confirm that the Fuser Oil Unit is facing the inside of the print- er.

❒Confirm that the Fusing Unit is properly positioned in the ma- chine.

N Close the upper left cover (A) and push the handle (B) slowly to the back until it clicks into place.

ZDJH051J

O If you removed the External Tray
in step D, reattach it to the printer.
Insert the hooks of the External
Tray into the printer slits, and	1
lower it toward you.

ZDJH010J

P If the Duplex Unit is installed, close the Duplex Reversal Unit.

Reference

See p.2 “Opening and Closing the Duplex Reversal Unit”

Q If the 2 Tray Finisher was in- stalled, reattach the 2 Tray Finish- er to the printer.

Reference

See p.1 “Detaching the SR770 (2

Tray Finisher)”

R Plug in the power cable and turn on the power switch.

The following message appears on the panel display. Please wait for a while.

Please Wait

21