Ricoh AP3800C Status, Possible Causes, Descriptions, and Solutions, The image is printed in the

	Other Printing Problems
Status	Possible Causes, Descriptions, and Solutions
The image is printed in the	The feed direction you selected and the feed direction select-
wrong orientation.	ed in Option Setup of the printer driver might not be the
	same. Make the proper settings.
The control panel error message	Open the front cover of the printer, and then close it.
stays on after removing the mis-
fed paper.
The print image is not clear.	Due to a sudden change in temperature, condensation might
	appear inside the printer, reducing print quality. If this oc-
	curs, when you move the printer from a cold room to a
	warmer room, do not use the printer until it acclimatizes to
	the temperature.
The print side of the page is a	Adjust the image density.
hazy gray.	To adjust the image density, press {Menu}, and select Image
		4
	Density from the Maintenance menu.
	See p.31 “Cleaning and Adjusting the Printer”.
	If paper is curled, correct it.
	Curled or folded paper might cause a hazy gray print. Curl-
	ing often occurs on postcards, so be sure to correct it before
	printing.
The printed image is different	When you use some functions, such as enlargement and re-
from the image on the compu-	duction, the layout of the image might be different from that
ter.	displayed in the computer display.
	You might have selected to replace True Type fonts with
	printer fonts in the printing process.
	To print an image similar to the image on the computer,
	make the settings to print out True Type fonts as an image.
	See the printer driver's Help file.
The printer does not print at	Printing at 1200dpi uses much memory. Therefore, depend-
1200dpi, even if 1200dpi resolu-	ing on the memory capacity, you may not be able to print at
tion is selected.	1200dpi. Either add memory to the printer, or reduce the size
	of data to be printed.
	See "Memory Capacity and Paper Size" in Administrator Refer-
	ence 2.
There are color differences in	Press {Menu}, and select "Color Regist." from the "Mainte-
the color documents.	nance" menu.
	See p.31 “Cleaning and Adjusting the Printer”.

Note

❒If the problem cannot be solved, contact your sales or service representative.

87