Ricoh AP3800C operating instructions H Install a new Photoconductor Unit

Replacing Consumables and Maintenance Kit

C Lift and hold the green handle at the top (A), and pull out the unit slowly (B).

1

ZDJH210J

H Install a new Photoconductor Unit.

For black, install one, and for color, install three.

A Take the unit out from the bag.

ZDJH221J

Important

❒Do not remove the cover that is attached to the bottom of the Photoconductor Unit at this time.

B Place the Photoconductor Unit, and remove the adhesive tape at the tip of the unit.

ZDJH222J

C Match the green arrow at the tip of the Photoconductor Unit to the rail inside the printer.

ZDJH223J

Important

❒Make sure the green arrow fits securely on the rail before proceeding to the next step.

D Push the front of the Photocon- ductor Unit slowly, slide the unit on the cover, and push in until it stops.

ZDJH224J

12