1.Replacing Consumables and Maintenance Kit

Detaching the SR770 (2 Tray Finisher)

There are times when you might have to detach the 2 Tray Finisher from the printer to remove misfed paper. This section describes how to detach the 2 Tray Finisher.

A Hold the handle at the top of the 2 Tray Finisher firmly with one hand, pull the 2 Tray Finisher straight out, and let go when it stops.

ZDJP201J

The 2 Tray Finisher is detached from the printer.

B Use both hands to push it straight back in, and let go when it clicks into place.

ZDJP202J

The 2 Tray Finisher is reattached to the printer.

Important

Be sure to attach the 2 Tray Fin- isher to the printer after closing the Duplex Reversal Unit. See p.2 “Opening and Closing the Duplex Reversal Unit”.

1

Page 11
Image 11
Ricoh AP3800C operating instructions Replacing Consumables and Maintenance Kit, Detaching the SR770 2 Tray Finisher