Ricoh AP3800C operating instructions Ready, Invalid Value Press #, A B C D E F G H 0 0 0 0 0 0

Replacing the Fusing Unit

U Confirm that the A3 paper which comes with the Fusing Unit is in the Bypass Tray, and then press {Enter}.

The printer prints 8 Test Sheet (A -

H). For details about Test Sheet, see p.41 “Test Sheet Samples”.

Note

❒It takes about a minute to start printing.

V Check the test sheets and select the correction value for A through H.

•Select "1", if black and magenta square overlap sharply and you can see white slits as the sample.

•Select "0", if black and magenta square do not overlap sharply and you can not see white slits clearly.

Press {U} or {T} to select "0" or "1" as the values for A - H. Press {En- ter} to move to the next letter. After setting the value for "H", press {En-

ter}, and the printer returns to the 1 ready condition.

Ready

Important

❒If you select "0" for each alpha- bets or an invalid value is select- ed, an error m essage is displayed. In this case, press {Enter} to return to the ready condition, and perform the "Fuser Adjust" manually. See p.35 “When replacing the fusing unit”.

Invalid Value

Press #

❒When "Toner is Almost Empty" appears on the panel display, replace the toner cartridge and perform the "Auto Adjust", and then perform "Fuser Adjust" manually.

Reference

⇒p.3 “Replacing the Toner Cartridge”

⇒p.34 “Auto Adjust”

⇒p.35 “When replacing the fusing unit”for "Fuser Adjust"

A B C D E F G H 0 0 0 0 0 0 0 0

23