Replacing the Fuser Oil Unit

G Holding the green handle, pull up the Fusing Unit slowly in the direction of the arrow.

ZDJH208J

Important

Do not touch any areas other than the handle.

H Put the removed Fusing Unit in a stable and level place.

I Lift the Fuser Oil Unit in the di- rection of the arrow to remove it, and put it in a stable and level place.

ZDJH052E

J Take out the Fuser Oil Unit from the bag, and remove seal (A), and then remove seal (B) as shown in the illustration.

1

ZDJH053J

Note

Be sure to remove seal (A), and then pull it out in a level man- ner.

Important

Be sure to remove the seals to avoid printer malfunction.

Be sure to remove seal (A) first, and then remove seal (B) to avoid oil leak.

Be sure to put the Fuser Oil Unit in a stable and level place to avoid oil leak.

There is oil on the removed seals and fuser oil roller. Be careful not to let them come in contact with your clothes.

Important

Do not touch inside of the Fus- ing Unit.

Be careful no to touch the area other than the shown in the il- lustration.

7

Page 17
Image 17
Ricoh AP3800C operating instructions Do not touch any areas other than the handle