Loading Paper

Loading Paper in Tray 2 and the Optional Paper Feed Unit

This section describes loading paper which is different from default size in Tray 2.

A Pull out the Paper Tray slowly un- til it stops.

ZDJH005J

B Set the paper guide lock to the "unlocked" position.

ZDJY003J

C Pushing the green lever of the side guide (A), move the side guide toward you to open it (B).

ZDJY802J

D Pinching both sides of the end guide (A), move the end guide in the direction of the arrow to open it.

3

ZDJY801J

E Load paper in the same direction.

ZDJY002J

Important

Confirm that the top of the stack is not higher than the limit mark inside the tray.

F Pushing the green lever of the side guide (A), move the side guide toward the paper stack un- til it stops (B).

ZDJY006J

59

Page 69
Image 69
Ricoh AP3800C Loading Paper in Tray 2 and the Optional Paper Feed Unit, Set the paper guide lock to the unlocked position