Ricoh AP3800C operating instructions Removing Misfed Paper, Detaching the 2 Tray Finisher

Troubleshooting

Removing Misfed Paper

If a paper misfeed occurs, an error message appears indicating the loca- tion of the misfed paper on the panel display. This printer has the auto-re- covery function, by which misfed pa- per is sent to the Standard Tray or Right Cover. Usually, you can re- move the misfed paper easily with this function.

	Detaching the 2 Tray Finisher
4

There are times when you might have to detach the 2 Tray Finisher from the printer to remove misfed paper. This section describes how to detach the 2 Tray Finisher.

A Hold the handle at the top of the 2 Tray Finisher firmly with one hand, pull the 2 Tray Finisher straight out, and let go when it stops.

ZDJP201J

The 2 Tray Finisher is detached from the printer.

B Use both hands to push it straight back in, and let go when it clicks into place.

ZDJP202J

The 2 Tray Finisher is reattached to the printer.

Important

❒Attach the 2 Tray Finisher to the printer after closing the Duplex Reversal Unit.

88