Ricoh AP3800C operating instructions ZDJH055J, ZDJH054J, ZDJH050E, ZDJH051J

Replacing Consumables and Maintenance Kit

K Match (U) on the front of the Fus- er Oil Unit and the arrow on the Fusing Unit as shown in the illus- tration.

1

ZDJH055J

Important

❒Be careful not to get oil on the metal point of the left side of the Fuser Oil Unit.

L Insert the left and right protru- sions of the Fuser Oil Unit into the white holders of the Fusing Unit (A), and then move the Fus- er Oil Unit in the direction shown by the arrow (B) to attach the Fus- er Oil Unit to the Fusing Unit.

ZDJH054J

M Holding the green handle with one hand, use your other hand to push the front area of the handle to create a slight slant, and push the Fusing Unit slowly to the back.

ZDJH050E

Note

❒Confirm that the Fuser Oil Unit is facing the inside of the print- er.

At this point, make sure the Fusing Unit is on the stand properly.

N Close the upper left cover (A) and push the handle slowly (B) to the back until it clicks into place.

ZDJH051J

O Place the old Fuser Oil Unit into the bag which contained the new Fuser Oil Unit, and seal the bag.

8