Loading Paper

B Slide the side guides outward (A), and then load paper until it stops with the print side up (B).

ZDJH204J

D Set the paper size using the con- trol panel as follows:

A Press {Menu}.

3

ZDJS001J

C Adjust the side guides to the pa- per width.

ZDJH205J

Important

Confirm that the top of the stack is not higher than the limit mark inside the tray.

Shuffle the paper before loading the stack onto the tray so multi- ple sheets are not fed in at one time.

"Menu" appears on the panel display

B Press {U} or {T} to "Paper In- put" menu, and then press {En- ter}.

The following message appears on the panel display.

Menu:

Paper Input

C Confirm that "Bypass Size" is displayed, and then press {En- ter}.

The following message appears on the panel display.

Paper Input:

Bypass Size

D Press {U} or {T} to display the size and direction of the paper in the bypass tray.

Bypass Size *11 x 17

After about two seconds, the display is returned to the menu.

65

Page 75
Image 75
Ricoh AP3800C Paper Input Bypass Size, Bypass Size *11 x, Adjust the side guides to the pa- per width