Ricoh AP3800C Troubleshooting, Error & Status Messages on the Control Panel, Alert Messages

4. Troubleshooting

Error & Status Messages on the Control Panel

❖ Status Messages

Messages/Second messages	Description	Solution
Calibrating...	The printer is calibrating the	Wait for a while.
	color.
Energy Save Mode	In Energy Save Mode Level 2.	No action required.
Hex Dump Mode	In Hex Dump Mode.	No action required.
Loading Toner...	The printer is loading the ton-	Wait for a while.
	er.
Offline	The printer is offline and can-	Press {On Line}.
	not print data.
Initializing... Please Wait	The printer is initializing the	Wait for a while.
	development unit.
Printing...	The printer is doing print job.	Wait for a while.
Processing...	Print data is being processed.	Wait for a while.
Ready	The default ready message.	No action required.
	The printer is ready to use.
Resetting Job...	Job is being reset.	Wait for a while.
Waiting...	The printer is waiting for the	Wait for a while.
	next data to print.
Warming Up...	The printer is warming up	Wait until the printer signals
	and not ready.	Ready.

❖ Alert Messages

Messages/Second messages	Description	Solution
Add Staples	The stapler is out of staples.	Replace new staples.
	Job is not stapled.	See p.100 “Adding Staples”.
Add Toner/Yellow/Magen-	The printer is out of the indi-	Replace a new toner cartridge
ta/Cyan/Black	cated toner(s).	of the indicated color(s).
		See p.1 “Replacing Consuma-
		bles and Maintenance Kit”.
Add Toner Black	The printer is out of toner (K).	Replace a new toner cartridge
		(K).
		See p.1 “Replacing Consuma-
		bles and Maintenance Kit”.

69