Magnavox ZV427MG9 owner manual Video, Selected item, Progressive Scan Default OFF

SETUPS

Video

STANDBY-ON

SOURCE TIMER SET DISPLAY OPEN/CLOSE

A

.@/: ABC DEF

1 2 3

GHI JKL MNO

4 5 6

PQRS TUV WXYZ

7 8 9

TIMER SPACE CLEAR

0

DISC MENU SETUP

o

s OK B

TITLERETURN

p

j B i

F h g C

TRACKING

--+

HDMI VCR DVD

REC REC MODE D.DUBBING AUDIO

I

Press [STOP C] if you are playing back a disc.

1Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].

2Use [K / L] to select “Video”, then press [OK].

3Use [K / L] to select a desired item, then press [OK].

1 Progressive Scan

2TV Aspect

3 Video Input

Submenu will appear.

4	Refer to 1 to 2 on page 76 and set
	the selected item.
	• For 3 refer to page 15.

5When you finish with setting, press [SETUP] to exit.

76 EN

1 Progressive Scan (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [OK].
General Setting
Playback
Display	Progressive Scan
Video	TV Aspect
Recording	Progressive Scan
	Video Input
Clock	ON
HDMI	OFF
Reset All
2) Use [{ / B] to select “Yes“, then press [OK].

General Setting

Playback			scan:
Activating progressive
Display	TV has		Progressive Scan
Check your		progressive scan
Video			TV Aspect
and connect	withProgressivecomponentScanvideo cable.
Recording			Select Video
Clock	ON
HDMI	OFF
NOTE :
Reset All
If there is no picture or picture is
distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

3)Use [K / L] to select “Yes“ within 15 seconds, then press [OK].

Your setting will be activated.

Note

•If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the HDMI or component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 2” on page 16, or page 17.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

2 TV Aspect (Default: 4:3 Letter Box)

You should select the TV aspect ratio to match the TV you are connecting to the unit. You either have a standard 4:3 TV or a widescreen TV (16:9 rectangular).

Use [K / L] to select your desired option, then press [OK].

General Setting
Playback
Display	Progressive Scan
Video	TV Aspect TV Aspect
Recording	Video Input
Clock	4:3 Letter Box
HDMI	4:3 Pan & Scan
Reset All	16:9 Wide

If you have a standard TV:

Select “4:3 Letter Box” or “4:3 Pan and Scan”. The “4:3 Letter Box” setting will display the entire widescreen DVDs on your standard TV, by placing black bars at the top and bottom of the picture, like a normal DVD player does. The “4:3 Pan and Scan” setting will fill the screen vertically, but both sides of the widescreen DVDs will be trimmed. Standard video input and standard DVDs will appear normal with either setting.

If you have a widescreen TV:

Select the “16:9 Wide” setting. Widescreen DVDs will fill the screen appropriately. To watch standard 4:3 video, use your TV’s aspect control to set the screen to your liking.