Advanced Features and Troubleshooting Manual
121
Using Color
6
Adjust the colors
1.
Use the Calibrate Colors menu in the printer’s front panel to adjust
the density according to the values you recording in the previous
procedure. Scroll to Adjust Each Color and press Menu.
■The current setting for each color is indicated by an asterisk.
■To change the setting, press <--- to decrease or ---> to increase the
color adjustment. Refer to the table on the next page for information on
these settings.
2.
After changing the density setting for any or all colors, reprint the Color
Reference Page:
■The dashed line reflects the new settings.
■In this example, the density for each color is set to a different value.
Adjust cyan:+1 *
<---- ----> OK
Cyan Magenta Yellow Black
-9
-7
-5
-3
-1
+1
+3
+5
+7
-6
-4
-2
0
+2
+4
+6
+8
+10
-9
-7
-5
-3
-1
+1
+3
+5
+7
+9
Color Reference Page
9698-18.color
-4
-2
0
+2
+4
+6
+8
+10