USD201-2

Symbols

The followings show the symbols used for tool.

･volts

･amperes

･hertz

･ alternating current

･no load speed

･ Class II Construction

･ revolutions or reciprocation per minute

FUNCTIONAL DESCRIPTION

WARNING:

•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Failure to switch off and unplug the tool may result in serious personal injury from accidental start-up.

Switch action

1

1. Slide switch

 

012768

 

CAUTION:

 

•Before plugging in the tool, always check to see

that the tool is switched off.

To start the tool, slide the slide switch toward the "I (ON)" position.

To stop the tool, slide the slide switch toward the "O (OFF)" position.

Adjusting the orbital stroke rate

1. Dial

1

012852

The orbital stroke rate is adjustable. To change the orbital stroke rate, turn the dial between 1 and 5. The higher the number is, the higher the orbital stroke rate is. Preset the dial to the number suitable for your workpiece.

NOTE:

•The dial cannot be turned directly from 1 to 5 or from 5 to 1. Forcing the dial may damage the tool. When changing the dial direction, always turn the

dial moving it through each intermediate number.

Constant speed control

Electronic speed control for obtaining constant speed. Possible to get fine finish, because the orbital stroke rate is kept constant even under load condition.

ASSEMBLY

CAUTION:

•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

Installing or removing application tool (optional accessory)

WARNING:

•Do not install application tool upside down. Installing application tool upside down may damage the tool and cause serious personal injury.

•Install attachment tool in the correct direction according to your work. Application tool can be installed at an angle of every 30 degree.

 

1

1. Application tool

2

 

installation bolt

 

 

 

2.

Holes in the

 

 

 

 

 

application tool

3

 

3.

Protrusions of

 

 

 

the tool flange

012888

5

Page 4 Page 6
Page 5
Image 5
Makita TM3000C instruction manual Functional Description, Assembly, Switch action, Adjusting the orbital stroke rate
Page 4 Page 6

TM3000C specifications

The Makita TM3000C is a versatile and powerful multi-tool that has gained significant attention for its exceptional performance and innovative features. Designed for both professionals and DIY enthusiasts, this tool is engineered to handle a wide range of applications, making it a must-have in any tool kit.

One of the standout features of the TM3000C is its powerful 3.0 AMP motor, which provides effective performance across various cutting, sanding, and grinding tasks. With a no-load speed of up to 20,000 oscillations per minute, users benefit from rapid results and efficiency in their projects. This high-speed capability allows for precision in detailed work, ensuring clean cuts and smooth finishes.

This multi-tool incorporates the proprietary Tool-less accessory change system, which allows users to switch between different attachments quickly and easily without the need for additional tools. The 12-speed settings further enhance versatility, allowing users to adjust the oscillation speed to suit the specific requirements of different materials, whether it be wood, metal, drywall, or other surfaces.

Another key characteristic of the TM3000C is its ergonomic design, which prioritizes user comfort. The slim body and soft grip handle reduce fatigue during extended periods of use, enabling users to maintain better control and precision. Additionally, the tool is lightweight, making it easier to maneuver even in tight spaces.

The TM3000C is also equipped with an innovative anti-restart function, promoting safety by preventing accidental start-ups after power interruptions. This feature, combined with an electronic speed control, enhances the overall user experience by providing consistent performance and minimizing the risk of accidents.

Moreover, the compatibility of the TM3000C with a wide range of accessories available in the market expands its utility further, making it adaptable for various tasks, from scraping and sanding to cutting and polishing. The tool's extensive capabilities make it suitable for home improvement projects, renovations, and professional construction work alike.

In summary, the Makita TM3000C stands out as a reliable, efficient, and user-friendly multi-tool. Its powerful motor, versatile speed settings, ergonomic design, and safety features make it an excellent choice for anyone looking to tackle diverse tasks with ease and precision. Whether you are a seasoned professional or a DIY enthusiast, the TM3000C is undoubtedly a valuable addition to your toolkit.
Top Page Image Contents