Advanced Print Features 2

Adjusting margins

This printer provides a front-panel interface to adjust the page margins:

Single-sided print

Automatically prints when the printer has one tray only.

Duplex (Double-sided print) Requires the Automatic Duplex/Lower Tray Assembly.

Duplex Unit must be installed in the upper tray slot.

In the front panel’s Printer Defaults menu, Duplex mode must be enabled.

Adjusting margins for a single-sided print

You might want to adjust the margins on a single-sided page if the image area is not centered on the page. In other words, the margins are not even, relative to the outside edge of the paper.

0236-63

1.In the front panel’s Printer Defaults menu, set the Duplex mode to

Disable.

2.Print the Margin Adjust page from the front panel.

a.Press Menu.

b.Scroll to Calibrate Margins. Press Menu; the display reads:

Print Calibration Page

<--- ---> Print

c.Press Print.

3.Determine if the margins need adjustment: use the page’s top- and left-margin gauges to note how much the margins are off-center.

Advanced Features and Troubleshooting Manual

33

Page 43
Image 43
Tektronix 740L manual Adjusting margins for a single-sided print