Advanced Print Features 2

6.Refer to your application’s manual for information on page orientation and page margins.

If your application has a setting for Averylabels, use it as a template. Otherwise, set margins and spacing according to the guidelines in the instruction sheets that are included with the labels. This table shows which Avery setting to choose with each label size.

Sheet size

Label size

Averylabel

 

 

setting

 

 

 

A/Letter

3.33 x 4 in.

5160

 

1 x 2.63 in.

5164

 

 

 

A4

38.1 x 99.1 mm

L7163

 

67.7 x 99.1 mm

L7165

 

 

 

7.In the application’s Print screen under Tray Selection or Paper Source, depending on the driver, select the Multi-Purpose Tray and send the job to the printer.

Guidelines for printing on labels

C A U T I O N

To avoid media jams and damage to the printer components, make sure that you follow these guidelines.

Use Avery label stock.

Each label is at least 25 x 67 mm or 1 x 2.625 in. in size. Smaller labels may peel off and damage the fuser or imaging unit.

If any of the labels on a sheet are missing, do not use that sheet; it may damage the fuser or imaging unit.

When selecting Label as the media type, the printer requires that the room temperature be cooler than 27˚ C (81˚ F). If the temperature is above 27˚ C (81˚ F), the printer reports an error and stops printing.

Advanced Features and Troubleshooting Manual

23

Page 33
Image 33
Tektronix 740L manual Guidelines for printing on labels, Sheet size Label size Avery label Setting