Tektronix 740L manual Installing the plug-in Windows, Using the plug-in

Advanced Print Features 2

Installing the plug-in: Windows

Compatibility requirements

■Photoshop 3.0 and higher

■Windows 95/Windows 98 and Windows NT

■(optional) TCP/IP support requires proper installation of IP networking software and cards

Installing the plug-in

1.From the printer’s CD-ROM, run setup.exe. Select Custom Install.

2.Select PhaserPrint plug-in for Photoshop; the file is installed in the Photoshop application’s Plug-insdirectory on your computer’s hard disk.

Using the plug-in

1.If you don’t already have a default printer selected, do the following:

■Macintosh: Open the Chooser. Select a PostScript driver (such as the Apple LaserWriter 8); select your printer. PhaserPrint software works like a printer driver, and prints to the printer you selected in the Chooser.

■Windows: Within the PhaserPrint software, select your printer and port, as described in “Print using (Windows)” on page 49.

2.Open Photoshop. Open an image file.

3.From the File menu, select Export. Select PhaserPrint; the PhaserPrint dialog box appears.

4.In the Printer Model field, select your printer.

5.PhaserPrint software supports the following image modes selected from Photoshop’s Mode menu. If you select a mode not listed here, an error message appears and your image is not printed.

■Bitmap

■Grayscale

■Indexed Color

■RGB Color

■CMYK Color

■Lab Color

Advanced Features and Troubleshooting Manual 47