Advanced Features and Troubleshooting Manual
35
Advanced Print Features
2
Adjusting margins for a duplex print
You might want to adjust the margins on a two-sided page if the image area of the
front side (shown in blue) is not aligned with the image area of the second side
(shown in red).
1.
Adjust the margins for a single-sided print (refer to page 33).
2.
In the front panel’s Printer Defaults menu, enable the Duplex mode:
select Long-Edge or Short-Edge.
3.
Print the Margin Adjust page from the front panel.
a.
Press Menu.
b.
Scroll to Calibrate Margins. Press Menu; the display reads:
c.
Press Print.
Print Calibration Page
<--- ---> Print
0236-62