Tektronix 740L manual Color corrections, Dic

6 Using Color

Color corrections

The printer provides TekColor Dynamic Correction, which consists of the following color correction modes:

Color correction mode		Description
Front panel	Driver selection
selection
Automatic	Automatic	Default setting. Automatically selects the optimum
		color correction for speed, vividness, and saturation.
SWOP	SWOP Press	Specification for Web Offset Publications. Typically
		used to match U.S. press standards.
Euroscale	Euroscale Press	Used to match equivalent Imation Matchprint®
		proofs.
Commercial	Commercial Press	Used to match commercial Imation Matchprint®
		proofs.
Toyo	Toyo	Used to match commercial Toyo printing inks on
		coated paper.
DIC	DIC	Used to match Dai Nippon printing inks on coated
		paper.
None	None	No correction made to colors.
Vivid Color	Vivid Color	Produces the brightest possible colors.
sRGB Display	sRGB Display	Adjusts color to closely approximate the colors on a
		standard display screen.
—	Use Printer Setting	Uses the color correction mode specified in the
		printer’s front panel setting rather than any printer
		driver setting.
Monochrome*	—	Leaves gray as is; converts RGB and CMYK to pure
		gray.
Raw RGB*	—	Leaves RGB as is; converts CMYK and gray to RGB.
Raw CMYK*	—	Leaves CMYK as is; converts RGB and gray to
		CMYK.

*Available only with a downloadable utility file.

N O T E

If your printer is on a network and you have changed the front panel settings, tell other users on the network. The front panel printer settings affect all prints made with non-Tektronix drivers.

For information on color education, printing ideas, personalized email subscription, and access to colorize.com, visit the Color Connection web site:

www.colorconnection.tektronix.com

118Phaser 740 and 740L Laser Printers