Tektronix 740L manual Using the front panel Copier Menu

9 Using Your Printer with a Scanner

Using the front panel Copier Menu

The printer allows you to control the settings listed in the table below. From the printer’s Help Pages menu, select Menu Map to print a Copier Menu.

Copier menu setting	Purpose
# of Copies	Selects up to 999 copies. To change the desired number, press
	<--- or --->.
	Press down and hold <---or --->to auto-increment the value.
	Release the button when the desired number of copies is
	displayed.
Color Mode	Selects the type of color reproduction from the following:
	■ Color Image: For full-color images. The image is reproduced
	with as accurate as possible color matching.
	■ Color Text: For images with colored text, line art or charts. The
	image is reproduced in full color, but text colors are accentuated
	and scanning occurs at a higher resolution to maintain text
	definition.
	■ Gray Scale: For copying or creating monochrome images. The
	image is reproduced in shades of gray.
	■ Black and White: The image is reproduced in full white and full
	black only. Especially suitable for copying line drawings.
Lighten/Darken	Lightens or darkens your prints on a scale of –10 (lightest) to
	+10 (darkest).
Color Saturation	Brightens or increases the saturation of all colors or reduces the
	saturation (add black) on a scale of –10 (blackest) to +10 (most
	saturated, brightest). Zero, the default, is neutral.
Zoom	Enlarges or reduces the size of the copy image from
	approximately 25% to 1000% of the original’s image size,
	depending on your scanner. The default setting is 100%. To
	change the scale value, press <---or --->.
	Press down and hold <---or --->to auto-increment the value.
	Release the button when the desired number of copies is
	displayed.
	For additional information on using the scaling function to enlarge
	and reduce copies, refer to “Placing and scaling images” on
	page 154.
Scan Area	Selects the size of your original image or input.
	■ The options available (for example, Letter, Legal, Tabloid, A3)
	will depend on the scan area of your scanner.
	■ Tray Size, the default selection, copies an area equal to the size
	of the media in the selected tray. If the media in the tray is larger
	than the area the scanner can image, it will scan the largest
	possible area and scale the image up to fit the media, without
	distortion.
Select Tray	Selects the media tray from which your copy or output will be
	printed.
	■ The options available will depend on the number of media trays
	in your printer.
Save Default	■ Changes the printer’s copier menu default settings and saves
	your own settings for the kinds of copies you typically make.
Reset Factory Defaults	■ Sets the defaults to the printer’s original selections.

152Phaser 740 and 740L Laser Printers