Radio Shack TAD-729 Using PAGE/INTERCOM, Transferring a Call Between the Handset and Base

3.When the service answers, press TONE () on the handset. Any addi- tional numbers you dial are sent as tone signals.

TONE

4.When you hang up, the phone auto- matically resets to pulse dialing.

USING PAGE/INTERCOM

You can use the TAD-729 as a two-way pager and intercom between the base and the handset. This is useful if the handset is away from the base and you want to locate it, or if you want to have a conversation between someone with the handset and someone at the base.

To page the base from the handset, press INTCM. The base and handset ring. Press SPEAKER or INTERCOM on the base to answer the page.

INTERCOMINTCM

To page the handset from the base, press INTERCOM. The handset and base ring. Press TALK or INTCM on the handset to answer the page.

In either case, if the called party does not answer within 1 minute, the paging stops. Press INTCM or INTERCOM again to re-start paging.

To end an intercom call, press TALK on the handset, press SPEAKER on the base, or hang up the handset.

If a call comes in during an intercom conversation, only the base rings but person at the handset can also hear the ring through the intercom. Either person can answer the call. Press TALK or SPEAKER once to end the intercom call, then press TALK or SPEAKER again to answer the call.

Note: The intercom does not operate if the party being paged is already on a call.

TRANSFERRING A CALL BETWEEN THE HANDSET AND BASE

You can use the TAD-729's intercom feature to transfer a call between the handset and the base.

19