1. Set DIAL MODE to T (tone).
DIAL MODE
2.Lift the handset and listen for a dial tone.
3.Press any number other than 0.
Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code number either.
If the dial tone stops, you have
4.Press TALK or place the handset on the base to hang up.
TURNING THE BASE’S RINGER OFF AND ON
RINGER
To turn off the base’s ringer, set RINGER on the back of the base to OFF. You can still make or receive calls using this
phone. Telephones on the same line (and the TAD's handset if it is away from the base) still ring when there is an in- coming call.
To turn on the base’s ringer, set RINGER to ON.
SETTING THE RINGER TONE/VOLUME
You can select one of four different ring- er tone/volume settings while the phone is not in the talk mode. Press 
or 
to increase or decrease to the ringer level setting.
Repeatedly press 
or 
until you hear the desired ringer setting. Each time you press 
or , the ringer changes and the display shows Ringer A High, Ringer A Low, Ringer B High, or Ringer B Low.
Note: Pressing 
when the display shows Ringer A High or 
when the display shows Ringer B Low does not change the setting. Press the other but- ton to change the setting.
12
