ADJUSTING THE TAD’S VOLUME
To adjust the speaker’s volume, repeat-
edly press VOL 
or 
on the base. The volume setting from 1 (lowest) to 10 (highest) appears in the message counter window.
DELETING MESSAGES
To delete the current message while it is playing, hold down DELETE until the TAD beeps.
DELETE PIN
To delete all messages at once, while messages are not playing, hold down DELETE on the base until the TAD beeps and 0 appears in the message counter window.
Note: You cannot delete new (not yet played) messages. If you try to delete all messages at once while you still have new messages, the TAD sounds five quick beeps and does not delete any messages.
SETTING THE REMOTE OPERATION PIN
The
Follow these steps to change the PIN to any number from 00 to 99.
Note: If you wait more than 2 minutes between each keypress, the TAD exits the PIN setting process. Start again at Step 1.
1.Hold down PIN until the TAD beeps and 00 appears in the message counter window.
2.Press SKIP to set the first digit of the PIN higher or REPEAT to set it lower. Then press PIN.
3.Press SKIP or REPEAT to set the second digit of the PIN, then press PIN. The TAD announces the new PIN.
To check your PIN at any time, press PIN. The PIN appears in the message counter window, and the TAD announc- es it.
Note: If you press SPEAKER or PLAY/ STOP while changing the PIN, the TAD exits. Begin again with Step 1.
31
