To transfer a call from the handset to the base, press INTCM. The call is placed on hold. When the person at the base an- swers, press TALK. The call is released from hold and transferred to the base. To bring the handset back into the con- versation for a
To transfer a call from the base to the handset, press INTERCOM. The call is placed on hold. When the person with the handset answers, press SPEAKER. The call is released from hold and trans- ferred to the handset. To bring the base back into the conversation for a
USING A HEADSET
You can talk with
To connect the headset, open the rub-
ber cover marked 
on the side of the handset, then insert the headset’s plug into the jack.
Notes:
•Connecting a headset disconnects the handset’s earpiece and micro- phone.
•
or 
on the handset also controls the connected headset’s volume.
•If you place the handset on the base to recharge it while the headset is connected, be sure the handset seats properly.
With a headset connected, you make or answer calls as usual using the keys on the handset. You can also make or an- swer calls by pressing the SPEAKER button located on the base.
You can use a handset holder (available from your local RadioShack store) to hang the handset on your belt for great- er convenience.
When you finish using the headset, dis- connect it from the handset and close the rubber cover to protect the jack.
20
