USING THE REMOTE HANDSET
The 340T is supplied with a system remote control that operates both this tuner and Cambridge Azur amplifiers.
Power
Switches the 340T between On and Standby mode. The blue LED on the front panel of the 340T indicates that it is On when bright and in Standby mode when dim.
|
| 1 – 10 keys |
|
| These allow access to any stored presets you might |
|
| have saved in the 340T. |
Store | FM/AM | 10 + key |
|
| |
Vol |
| Allows access to preset stations |
Mode |
| Store |
Vol |
|
|
|
| To store a preset with the remote press Store then |
i |
| use the << >>buttons to select the desired preset |
| location. Press store again to confirm. | |
|
|
Clock
This button is used to access the Alarm menu as discussed in the Operation Instructions section of this manual.
i(Info)
Switches between the Display modes described in the Front Panel Controls section. The RDS information on the FM band is dependant on the strength of the signal.
Bright
Alters the brightness of the display backlight. There are three levels of brightness: Bright, Normal, and Off.
Please note that the following buttons will only operate a matching Cambridge Audio azur amplifier:
Volume +/-
Volume buttons to increase or decrease the Volume of the amplifier output.
Aux | CD | Tuner | |
Phono | DAB | ||
| |||
DVD | AV | Tape | |
MD | Mon | ||
|
FM/AM
This button switches between the FM and AM bands that the 340T is capable of receiving.
<< >>
For use with Tuning, Alarm and Clock settings.
Mode
Toggles between Scan and Preset modes, thereby changing the functionality of the << >> buttons.
Source Select
The five Source Select buttons and the Tape Monitor Select button are used to change the input source (CD, DVD etc).
Mute
This button mutes the audio on the amplifer. The Mute mode is indicated by the channel LED flashing.
10Azur FM/AM tuner
