OPERATING INSTRUCTIONS
Tuning and Listening to the 340T
1.Press the Standby/On button on the front panel.
2.Select FM or AM by pushing the FM/AM button on front panel or remote control.
3.Press the << >> buttons to manually select the desired frequency, or hold either button down to search for a station.
Automatic Tuning
To tune a station automatically, proceed as above, at step 3 press the Store/Mode button once.
Press the Step << >>button to select the station you want to listen to. When a station is tuned in, the tuning process will stop automatically. (Automatic selection).
Press << >>again to select another channel.
Setting Presets
Select the station you wish to store. Press the Store button once, then use << >> to select the slot where the station will be stored. Press Store again to save it.
How to Select Preset Stations
1.Press the Standby/On button on the front panel.
2.Select FM or AM by pushing the FM/AM button on front panel or remote control.
3.Press chosen preset button to listen to the corresponding station. Alternately, hold down the Mode/Store button on front panel to enable
8Azur FM/AM tuner
the preset tuning mode, then press the << >> buttons to select a preset station.
Setting the Clock
The user can either allow RDS transmissions to automatically set the Clock Time/Date, or the Clock can be set manually. To change the Clock mode, press and hold the Clock button on the remote control. Use the << >> buttons on the remote to change mode between RDS and Manual. Press the Alarm button again to confirm your choice. If Manual mode is selected, you can then set the time. Firstly, adjust the hour using the << >> buttons. When that is done, press Clock again to adjust the minutes. Press Clock again to finish.
Setting the Alarm Time
The Alarm function will turn on the 340T at a chosen time. It will also generate a command on the control bus that, when connected, will turn on a Cambridge Audio azur series amplifier.
To set the Alarm time:
1.Press Alarm/Clock on your remote handset.
2.Use << >> buttons to select if the alarm should be off, just work once, or every day.
3.Press Clock.
4.Press << >> keys to alter the hour
5.Press Clock.
6.Press << >> keys to alter the minute
7.Press Clock to finish.
