Tektronix 740L manual Image separation, Number of images

2 Advanced Print Features

Image separation

■Only available if the Replicate images box is checked.

■Type an amount, in inches or millimeters (depending on your system’s measurement standard), to specify the amount of separation between each replicated image.

■A larger amount reduces the number of images that can be printed at one time.

■Minimum allowed separation value is 0.

■Maximum separation value is 100 mm (4 inches).

■Default separation value is 3.175 mm (0.125/one-eighth inches).

■Valid characters for this field are 0 to 9 and a period (or decimal point).

■As you type a value, the stylized representation of the page, and Number of images and Image layout values are dynamically updated. If the value entered in the Image separation field is out-of-range, the values in these other fields are replaced by question marks, and no images are shown in the stylized representation of the page. If the value is out-of-range, and you click Print or Save, the following alert is displayed:

The value for Image separation is out of range. It will be replaced with the closest allowed value.

Number of images

■Displays the number of scaled images that will fit in the image area of the currently selected Media size (selection) and Landscape orientation options.

■Number of images reflects the current Image separation value.

■If the Replicate images box is not checked, this number is set to 1.

■If either Scale or Image separation values are out-of-range, a question mark is displayed.

54Phaser 740 and 740L Laser Printers