Tektronix 740L manual Calibrate Colors menu selections, Menu item What it does How it works

6 Using Color

This table shows the selections available in the Calibrate Colors menu.

Calibrate Colors menu selections

Menu item*				What it does	How it works
Adjust light/dark				Lightens or darkens all toner	■	Press Menu.
<----	---->	Menu		colors.
	Lighter/Darker:+0 *			Lightens or darkens all toner	■ To lighten colors, press
	<----	---->	OK	colors.		<--(the number
				The current Light/Dark setting		decreases in 1-point
						steps); then press OK.
				reflects the average value of the
				four separate density settings.	■ To darken colors, press
				Each increase adjusts all four		-->(the number
				density values up or down the		increases in 1-point
				same amount. The available		steps); then press OK.
				adjustment range is limited so
				that no single color exceeds the
				±10 value limit.
Adjust each color				Controls the color density for	■	Press Menu.
<----	---->	Menu		each color independently.
	Color Reference Page			Prints a sample of the current	■	Press Print.
	<----	---->	Print	density settings and a range of
				settings for each color.
	Adjust <color>:			Enters the menu to calibrate a	■	Press Menu.
	<---- ----> Menu			single color.
	Adjust <color>:+0 *			Calibrates the indicated color.	■ To lighten this color
	<----	---->	OK			toner, press <--(the
						number decreases in
						1-point steps); then
						press OK.
					■ To darken this color
						toner, press -->(the
						number increases in
						1-point steps); then
						press OK.
	Reset adjustments			Resets the color calibration to	■	Press Menu; then press
	<----	---->	Menu	the default settings.		Confirm.

*An asterisk (*) indicates the current setting.

122Phaser 740 and 740L Laser Printers