Tektronix 740L manual Loading Tektronix transparencies

2 Advanced Print Features

Loading Tektronix transparencies

1.Push down on the TRANSPARENCY tray’s metal plate until it clicks, locking it in place.

TRANSPARENCYA4

0236-09

2.Fan the transparencies, being careful not to leave fingerprints, which can result in a smudged print.

3.Place Tektronix transparencies in the tray so that the logo strip is under the hooks, face-up.

4.Load approximately 100 sheets of transparency film. Use the label on the inside of the tray as a reference for the proper amount of media.

3

4

TRANSPARENCYA4

0236-10

5.Insert the TRANSPARENCY tray:

■If you have only a single-tray slot, insert the TRANSPARENCY tray there.

■For printers with the Automatic Duplex/Lower Tray Assembly, insert the TRANSPARENCY tray into the Middle slot.

■For printers with only the Lower Tray Assembly (Duplex Unit is not installed), insert the TRANSPARENCY tray into the Upper or Middle slots.

10Phaser 740 and 740L Laser Printers