Demo mode
This mode is intended to be used in the shops to dem- onstrate the oven functionality without any power con- sumption except the oven lamp. To activate this func- tion the appliance should be in
— Press button 
and “
“ for approximately 2 sec-
onds (Fig. 17). An acoustic alarm will sound for a short time.
—Press button 
and the “id” indication will appear in the display.
All oven functions can be selected.
The thermometer symbol |
| will not flash anymore and | Fig. 17 |
| |||
|
| ||
“id” indication will be replaced by number digits. |
| ||
Follow the above described procedure to disable |
| ||
the demo mode. |
| ||
Error code
The electronic programmer does a continuous diag- nostic check of the system. If some parameters are not correct, the control unit will stop the activated func- tions and the corresponding error code (letter “E” fol- lowed by number digits) will be displayed.
For further details, refer to chapter “Something not working” on page 20.
11
