Clean the oven door glass with warm water and a softh cloth only. Never use harsh abrasives as they could damage the special
Once the cleaning is carried out, refit the oven door, following the procedure in reverse.
The two glasses in the middle are special glasses that have been treated to resist heat. They are marked with a small dot located on a corner and a black frame respectively.
It is important that, when refitting the oven door, the inner glasses are fixed in the right position.
To check if this operation has been carried out correctly, when inserting the glass, make sure that the surface of the glass marked with a black frame
looks downwards and that the dot is located on theFig. 24 upper left corner of the glass (Fig 24).
DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panels may shatter.
If the door glass panels become chipped or have deep scratches, the glasses will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Force Centre who will be pleased to advise further.
19
