Something not working
If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Centre.
SYMPTOM | SOLUTION |
| |
The oven does not come on. | Press the OVEN ON button, then select a cooking | ||
| function. |
| |
| Check the fuse and ensure the socket switch or the | ||
| switch from the mains supply to the oven are ON. | ||
|
|
| |
The oven light does not come on. | Switch on the oven using push button | . | |
| Check the light bulb, and replace it if necessary (see | ||
| "Replacing the Oven Light") |
| |
|
|
| |
It takes too long to finish the dishes, or they are | The temperature may need adjusting |
| |
cooked too fast. |
| ||
Refer to the cooking function sections and to any | |||
| |||
| cooking chart provided |
| |
|
| ||
Steam and condensation settle on the food and the | Leave dishes inside the oven no longer than | ||
oven cavity. | minutes after the cooking is completed. |
| |
|
| ||
|
|
| |
The timer does not work. | Check the instructions for the timer. |
| |
|
| ||
|
| ||
The oven fan is noisy. | Check that shelves and bakeware are not vibrating in | ||
| contact with the oven back panel. |
| |
Error code "E40" appears on the control panel. Switch the appliance off and leave it to cool down. Push button ON / OFF to switch on the appliance.
An error code other than "E40" appears on the | Take note of the error code and contact an authorised |
control panel. | Service Centre. |
|
|
The display shows "12.00". | Set the time of day (see chapter "How the set the time |
| of day"). |
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:
0870 5 929929
Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details under the heading “Something Not Work- ing.”
When you contact the Service Force Centre you will need to give the following details:
1.Your name, address and post code
2.Your telephone number
3.Clear and concise details of the fault
4.The model and serial number of the appliance (found on the rating plate)
5.The purchase date
20
