Safety and Energy Saving Functions
Safety Cut-Off Function
The oven will switch off automatically if any change of setting is made, according to the table below (Fig. 14).
| If temperature setting is: | the oven will switch off: |
| ||
|
|
|
|
|
|
| 250°C | after 1 1/2 hours |
| ||
| from 200 up to 245°C | after 5,5 hours |
| ||
|
|
|
|
|
|
| from 120 up to 195°C | after 8,5 hours |
| ||
|
|
|
|
|
|
| less than 120°C | after 12 hours |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 14
Child Safety Function
To avoid children switching on the oven, it is possible to lock the oven controls.
1. Turn off the oven by pressing button .
2. Press buttons | and “ |
| “ at the same time and |
keep them pressed for about 3 seconds. An acoustic signal will be emitted and the indication ‘SAFE’ will appear in the display (Fig. 15).
3.The oven is now locked. Neither oven functions nor temperatures can be selected.
To unlock the oven:
Press buttons and “ “ at the same time and keep
them pressed for about 3 seconds. An acoustic signal will be emitted and the indication ‘SAFE’ will go off. The oven can now be operated.
"Fast Heat Up" function (Booster)
After a cooking function has been selected and the temperature has been adjusted, the cavity will gradually heat up until the selected temperature is reached. This will take from 10 to 15 minutes, depending on selected function and temperature.
If it is necessary to reach the required temperature in a shorter time, the fast heat up function can be used.
1.Switch the oven on by pressing button .
2.Set the required cooking function and temperature as explained in the previous pages.
3. Set the temperature by pressing button “ “ or ““. The temperature will appear in the display.
4.Press button . The temperature display will show "FHU" (Fig. 16).
5.Press button and the symbol “°” will flash for approximately 10 seconds. Now it is possible to select the required temperature by pressing button “ “ or ““.
6.When the required temperature is reached, an acoustic alarm will sound for a short time, and the temperature display will revert to the set temperature.
This function can be used with any cooking function or temperature.
Fig. 16
Residual Heat Function
When a Cooking Duration time is set, the oven will automatically switch off a few minutes before the end of the programmed time, and use the residual heat to finish your dishes without energy consumption. All current settings will be displayed until the Cooking Duration time is over.
This function will not operate when the Cooking Duration
Fig. 15 time is less than 15 minutes.
10