Control Panel
Cooking Functions | Temperature | Time |
display | display | display |
1 | 2 | 3 | 4 | 5 | 6 | 7 |
Push Buttons
1.
- ON / OFF
2.
- Cooking Functions Control
3.
- Fast Heat Up Function
4.
- Pyrolitic Function
5.- Decreasing Control (Time or Temperature)
6.
- Increasing Control (Time or Temperature)
7.
- Time Function
"On/Off" Push Button
The oven must be switched on before setting any cooking function or programme. When button 
is pressed, the
oven symbol will come on the display and the oven light will switch on (Fig. 1).
To switch off the oven, you can press button 
at any
time. Any cooking function or programme will stop, the oven light will switch off and the time display will show the time of day only.
Fig. 1 |
All the oven functions are controlled by an electronic programmer.
You can select any combination of cooking function, cooking temperature and automatic timing.
Special functions
The following functions can be activated by pressing two buttons at the same time:
- Child lock: press button | and button “ |
| “. |
-Beep on touch: press button 
and button “
“.
-Demo mode: press button B and button “
“.
For further details, see chapter “Safety and Energy Sav- ing functions”.
In the event of a power failure, the programmer will keep all the settings (time of day, programme setting or programme in operation) for about 3 minutes. If power is not restored within 3 minutes, all the settings will be cancelled. When the power is restored, the numbers in the display will flash, and the clock/timer has to be reset.
Cooling fan
The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel, as shown in the diagram.
The cooling fan may run on after the oven is switched off to keep the controls cool. This is quite normal.
The Safety Thermostat
This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent
5
